Roll-off container for concrete recycling

Model: BRO-RBH

Roll-off container for concrete recycling

Watertight roll-off container for concrete recycling, built to ANSI Z245.60-2008 standards, with continuous welding checked by penetrant gas testing.

Model: BRO-RBH
Download the brochure
Description
Technical data
Specifications
Options
Description

Discover our roll-off container, the BRO-1284-RBH, specifically designed for concrete recycling. Adhering strictly to the ANSI Z245.60-2008 standard, this container ensures optimal watertightness with its continuous welding. For increased reliability, each unit is tested with penetrant gas, guaranteeing the robustness and quality of the weld. An essential choice for efficient management of concrete waste.

Technical data

  • Interior dimensions: 12 feet long x 4 feet high x 8 feet wide
  • Rear door height: 5 feet
  • Approximate weight: 3,970 pounds

* The parameters and dimensions given above are for guidance only. Actual dimensions may differ.

Specifications

  • Constructed to ANSI Z245.60-2008 standards
  • Rounded walls made of 10 gauge steel
  • Top frame: 4 inches x 3 inches x 3/16 inch
  • Exterior ladder positioned on the driver’s side wall, towards the front
  • Front wall reinforcements: 4 inches x 2 inches tubular x 3/16 inch and C6 @ 8.2
  • Rear reinforcements: 3 inches x 5 inches tubular x 3/16 inch with brackets for wall bottom
  • Tarp hook: 4 at the front, 5 per side, 3 at the rear
  • Floor: 3/16 inch steel with C3 @ 4.1 profiled joists, spaced approximately 16 inches center-to-center
  • Longitudinal beams: 6 inches x 2 inches x 1/4 inch
  • Offset heavy-duty wheels: 2 wheels, 8 inches in diameter x 10 inches long (4 discs)
  • Lifting hook: 1 1/4 inch “J” type
  • Ascent rollers: 2 rollers, 4 inches x 6 inches
  • Rear door: 3/16 inch steel, side-opening, with 3/16 inch tubular construction
  • Rear door hinges: 2 heavy-duty hinges
  • Rear door latch and alignment system: 1/2 inch with “V” guides
  • Safety chain: 3/8 inch
  • Watertightness: Continuous welding and penetrant gas tested for sealing
  • Sealant: Duraseal 2 inch fixed with a riveted stainless steel flat bar
  • Side door latch: 1 ratchet type
  • Bottom door latch: 2 eccentric ratchet types
  • “Slide-everything” liner: 1/4 HDPE on the interior walls of the container

Finish:

  • Surfaces degreased and thoroughly cleaned with high-pressure steam
  • One coat of industrial primer applied to the inside, outside, and underneath the container
  • Two coats of industrial enamel paint applied to the exterior sides
  • Color: as chosen by the customer

Options

RELATED PRODUCTS

SUBSCRIBE TO OUR NEWSLETTER!

FOLLOW US!