Description

CDR-4060 series (40 % waste / 60 % recycling)

Available in 4 - 6 - 8 and 10 cubic yards

  • 12 ga. steel outside walls and inside separation wall
  • 11 ga. steel floor with two profiled full floor length capped bottom channels
  • 3/16" Side pockets 
  • (2) 14 ga. steel lids with polyethylene sliding access door.(available in 4-6-8 cu. yd.),
     or (2) 14 ga. steel lids and (2) side access polyethyelene lids (available in 8 and 10 cu. yd.).
  • Swivel lock - release mechanism to select the opening of one compartment at a time while dumping.
  • (1) coat of primer and (2) coats of industrial paint (standard 1 color)
  • Compartment identification: Waste Logo 16" x 18" and Recycling Logo 16" x 18"
  • Identification on how to open and close each compartment when dumping
  • No Parking decal 6" x 6"

Tech Sheet *

CDR-1XX-XXXX dimensions (overall)        
Model CDR-104 CDR-106 CDR-108-LP CDR-110-LP
Volume 4 yd3 6 yd3 8 yd3 10 yd3
Weight 1,115 lbs 1,336 lbs 1,541 lbs 1,710 lbs
Length 82 3/4" 82 3/4" 82 3/4" 82 3/4"
Width 56 1/2" 74 3/4" 88 3/4" 88 3/4"
Height 73 3/4" 71" 77 3/4" 89 1/2"
Loading height 51 3/4" 51 3/4" 51 1/2" 63 1/2"
Loading height (lateral door)       43 3/4"
Lateral doors, steel (1/side)       (2) 29 1/4" x 22 1/2"
CDR Version 5050 4060 6040
Sliding polyethylene lids (2) 30" x 30" (1) 24" x 30"
(1) 30" x 30"
(1) 30" x 30"
(1) 24" x 30"
Compartment widths 36 1/4" 29 1/4" 43"

* Sizes and specifications are provided as indications. Actual specifications may vary.

Specifications

FACING THE CONTAINER: 40 % WASTE LOCATED ON THE DRIVER SIDE/ 60 % RECYCLING LOCATED ON THE PASSENGER SIDE

Dimensions: 70" length x 80" width x 99 3/8" height,
Loading height 72 1/4'', 
12 gage steel outside walls and inside separation wall.
10 ga steel floor with profiled full floor length capped bottom channels. 
3/16" side pockets.  
(2) 14 gage steel lids with polyethylene sliding access door.  
Swivel lock - release mechanism to select the opening of one compartment at a time for dumping. 

FINISH:
Degreasing of the surfaces and a complete high pressure steam wash.
(1) Coat of industrial primer 1.5 mil dry.
(2) Coats of industrial enamel 1.5 mil dry. 
Color: customer's choice (standard painted 1 color)

Compartment Identification: waste logo 16" x 18" and recycling logo 16" x 18".
Identification on how to open - close each compartment.  
No parking decal 6" x 6".

Options

PAINT options (An assortment  of colors is available to you)

  • Waste and Recycling compartement conversion
  • Container 1 color and steel cover lids 2 colors
  • Container and steel cover lids 2 colors

LETTERING

  • Company LOGO and/ or additional lettering (To use as your marketing space)
  • Numbering for inventory purposes

DRAIN PLUG
SIDE ACCESS DOORS

 

Videos

Waste and recycling container dumping

Drawings *

* Sizes and specifications are provided as indications. Actual specifications may vary.