RHL - Hook Lift Container Carrier
Description
Hook lift container carrier.
Tech Sheet *
|
GENERAL SPECIFICATIONS |
||
|
Model |
RHL-2414-2A |
RHL-2418-2A |
|
Lifting capacity |
24,000 lb. |
24,000 lb. |
|
Length (A) |
148'' |
196'' |
|
Dry weight |
6,500 lb. |
6,500 lb. |
|
Dumping angle (B) |
± 50° |
± 50° |
|
Operating Pressure |
2,000 PSI. |
2,000 PSI. |
|
Hooklift container length compatibility (D) |
10’ to 14’ |
10’ to 18’ |
|
HOOKLIFT FRAME |
||
|
Frame |
8 3/4'' high Z-frame |
|
|
Container pads and wear pads |
(4) container guides with nylatron wear pads (2/side) |
|
|
Guiding rollers |
(2) 4'' Dia. guide roller with a 9'' conical end (1/side on rear end) |
|
|
SLIDING JIB AND HOOK |
||
|
Fabrication |
Made of 100,000 PSI. steel |
|
|
Wear pads |
Nylatron wear pads |
|
|
Hook height (C) |
32'' |
|
|
CYLINDERS |
||
|
Main cylinders |
(2) 5 1/2'' bore, 50'' stroke, double action cylinders |
|
|
Sliding jib cylinder |
(1) 3'' bore, 32'' stroke, double action cylinder |
|
|
CONTROLS AND SAFETY |
||
|
Controller |
(1) wired controller, located in front of the trailer |
|
|
Container hold-down |
Hold-down hook mounted on frame |
|
|
Landing gear |
(1) landing gear |
|
|
Safety system |
Safety system to prevent hazardous operations |
|
|
HYDRAULICS |
||
|
Tank |
19 gal. (70 liters) |
|
|
Filter |
10 Microns return filter, installed in the tank |
|
|
Hydraulic unit |
Independent with a 13 HP Honda motor |
|
|
AXLES AND BRAKES |
||
|
Axles |
(2) tandem axles |
|
|
Axles |
12,000 lb. (each) |
|
|
Wheels / Tires |
Double wheel (235/85R16) |
|
|
Brakes |
High performance electric brakes |
|
|
MUD-FLAPS |
||
|
Mud-flaps |
(2) Mud-flaps |
|
|
ELECTRICAL SYSTEM |
||
|
Compliance |
FMWSS/CMVSS approved L.E.D. |
|
|
Wiring |
100% waterproof |
|
|
Lighting disposition |
- (2) L.E.D. back-up lights (1/side) - (4) L.E.D. stop lights (2/side) - (1) L.E.D. license plate light - (1) L.E.D. three-way light with MTC compliance (mid-bumper) - (2) Side reflectors (1/side) |
|
|
TARPING SYSTEM |
||
|
Tarping system |
12 volts electric tarping system |
|
|
Pivot type |
Spring-loaded pivot arms |
|
|
FINISH |
||
|
Paint |
(1) Coat of epoxy primer, (2) Coats of black urethane paint |
|
* Sizes and specifications are provided as indications. Actual specifications may vary.
