Description

3.5 cubic yard capacity.

The CPF-HD compactor is ideal for industrial, manufacturing or printing facilities, transfer stations, large warehouses or where reliability, durability and toughness of the equipment is required.

The extra rugged construction provides durable strength where it is needed, greater nominal force, optimal productivity, assuring a longer wear life for maximum performance and minimum maintenance.

It is equipped with the "DURATECH" hydraulic & electrical control panel. This system allows you to have a programmable cycle with the possibility of pre-programmed hydraulic and electrical options, without modifying anything within your control panel. The system inform's, through worning lights, of any anomalies, reducing the need for maintenance and service calls.

Tech Sheet *

Dimensions
Capacity (by manufacturer) 3.5 cubic yards
2.68 cubic meters
Capacity following WASTEC requirements 2.82 cubic yards
2.15 cubic meters
Ram face pressure Normal: 39.55
Maximum: 45.97
Capacity per hour WASTEC 130 cubic yards
99 cubic meters
Loading opening 72" X 60"
Overall length 186 3/16"
Overall width 102"
Overall height 57 3/16"
Legs height 14 1/8"
Ram exit 52 1/4"
Approximate weight (pounds) 7899
Specifications
Steel floor 3/8" (T1)
Steel walls 1/4" (T1)
Skid crusher 6" X 7 1/2" X 1 1/2"
Rubber sweeper 1/2" X 6"
Cylinder diameter 7"
Rod cylinder diameter 4"
Hydraulic unit
Motor 20 HP
Pump 18 GPM
Tank capacity 50 GAL (USA)
Operational pressure 1850 PSI
Maximum pressure 2150 PSI
Nominal force 71 000 pounds
Maximal force 82 500 pounds
Ram penetration 12"
Cycle time (seconds) 78
Ram
Face 30" X 60" X 1/2"
Side 1/4" (T1)
Top 3/8" (T1)
Bottom 3/8 " (T1)
Control panel
Electricity (for motor) 575 / 460 /230 / 200 Volts - 3 Ph - 60Hz or 230 Volts - 1 Ph - 60 Hz
Transformer voltage control CSA-UL 120 Volts

* Sizes and specifications are provided as indications. Actual specifications may vary.

Photos

Heavy-duty industrial compactor

Heavy-duty industrial compactor