Heavy-duty roll-off container

Model: BRO-SHD

Heavy-duty roll-off container

Extra-heavy-duty roll-off container for transporting heavy and abrasive materials. Available in capacities ranging from 11 to 91 cubic yards (yd3).

Model: BRO-SHD
Download the brochure
Description
Technical data
Specifications
Options
Parts and accessories
Description

This extra heavy duty roll-off container is meant for extreme use and is mainly utilized to collect heavy and abrasive metal, like steel.

The container is built with close-set square vertical posts, a 1/4″ thick floor, a stronger frame, etc.

Each container can be customized with a range of options to precisely fit your needs.

Available in capacities ranging from 11 to 92 cubic yards (yd3) and constructed in compliance with ANSI Z-245, 2008 standards.

This roll-off container is the evolution of our standard roll-off container, known for its advanced design and cost-effectiveness. The extra-robust version is the quintessential choice for optimal performance without compromising on quality.

Contact us to find out how this container can be adapted to meet your most challenging demands.

Technical data

Model Capacity
(yd3)
A
(inches)
B
(inches)
C
(inches)
D
(inches)
BRO-1084-SHD 11 120 88 49 134
BRO-1484-SHD 15 168 88 49 185
BRO-2084-SHD 22 240 88 49 257
BRO-2085-SHD 27 240 88 61 257
BRO-2085.5-SHD 30 240 88 67 257
BRO-2086-SHD 33 240 88 73 257
BRO-2087-SHD 38 240 88 85 257
BRO-2284-SHD 24 264 88 49 281
BRO-2285-SHD 30 264 88 61 281
BRO-2286-SHD 36 264 88 73 281
BRO-2287-SHD 42 264 88 85 281
BRO-2484-SHD 26 288 88 49 305
BRO-2485-SHD 33 288 88 61 305
BRO-2486-SHD 39 288 88 73 305
BRO-2487-SHD 46 288 88 85 305
BRO-2685-SHD 35 312 88 61 329
BRO-2787-SHD 51 324 88 85 341
BRO-2886-SHD 46 336 88 73 353
BRO-2887-SHD 53 336 88 85 353
BRO-3083-SHD 25 360 88 37 375
BRO-3086-SHD 49 360 88 73 377
BRO-3087-SHD 57 360 88 85 377
BRO-3285-SHD 44 384 88 61 401
BRO-3287-SHD 61 384 88 85 401
BRO-3487-SHD 65 408 88 85 425
BRO-3587-SHD 67 420 88 85 437
BRO-3885-SHD 52 456 88 61 473
BRO-3887-SHD 73 456 88 85 473
BRO-4287-SHD 80 504 88 85 521
BRO-4687-SHD 88 552 88 85 569
BRO-4887-SHD 92 576 88 85 593

* The parameters and dimensions given above are for guidance only. Actual dimensions may differ.

Specifications

Doors:

  • Barn style rear door
  • Constructed of 3/16” tubing
  • Steel 10GA

Floor:

  • 1/4” Steel floor
  • Crossmembers C-3 @ 4.1 (±12” c/c)
  • Wear plate  under main rails 3/8 ” X 2″
  • 4 Rollers 8 ” diameter x 10 “
  • Main rails 6 ” X 2 ” X 1/4 “
  • Cable hook 1 1/4 ” type ”J”
  • 2 nose rollers 4″ x 6″

Walls:

  • Steel walls 10 GA
  • Upper frame 4 ” X 4 ” X 1/4 “
  • Heavy-duty door hinges
  • Vertical reinforcement (Rectangular side post) in 10 GA steel (± 14″ space between posts) with drain plug 3/4”
  • Crossmembers in C-6 @ 8.2
  • Front reinforcements and push guides in C-6 @ 8.2

Robust hinges: 

  • 2X (3′, 4′ et 5′)
  • 3X (6′ et 7′)

Closing and guiding system:

  • Door latch and alignment system 1/2” with ”V” guides,
  • 3/8″ security chain
  • 2 closed hook (3′, 4′ and 5′)
  • 3 closed hook (6′ and 7′)

Finition:

  • Degreasing of the surfaces and a complete high pressure steam wash.
  • (1) Coat of industrial primer 1.5 mil dry.
  • (2) Coats of industrial enamel 1.5 mil dry.

Options

  • Steel floor  T1
  • Steel walls T1
  • Longitudinal rails 2” x 6” x 3/8”
  • Longitudinal rails 3” x 6” x 1/4”
  • Wear strips under longitudinal rails 2” x 3/8″
  • Perimeter tubing 4” x 4” x 1/4”
  • Corner reinforcement 2” x 2” x 1/4” on perimeter tubing
  • Addition of half-round 10GA vertical reinforcements
  • Sealed rectangular vertical reinforcements 10GA
  • Duraseal 2” liquid-tight seal (30 duro)
  • Interior hooks for tarp support, placed at 24” intervals at the top of the container
  • Swing-out separator panels
  • Side-opening separator panels on hinges
  • Roll-off style dump gate with side-opening “CAM” system
  • Dual vertical split rear door
  • Dual horizontal split rear door
  • Flat front with access cage for hook (doghouse)
  • “C” cable hook attachment
  • “Andy” type door latches with 3/8” tensioner and eccentric plates (2)
  • Lever arm type door latches with 3/8” tensioner and side hook
  • Addition of an “L” hooklift attachment, Height: 36” or 54” or 62”
  • Sign holder + aluminum sign cabinet
  • Recycling roof with side doors, 36” high and 20′ long with locking mechanism

Parts and accessories

Please select products in "Products" section

RELATED PRODUCTS

SUBSCRIBE TO OUR NEWSLETTER!

FOLLOW US!