• Constructed to ANSI Z245.60-2008 standards
• Rounded walls made of 10 gauge steel
• Top frame: 4 inches x 3 inches x 3/16 inch
• Exterior ladder positioned on the driver’s side wall, towards the front
• Front wall reinforcements: 4 inches x 2 inches tubular x 3/16 inch and C6 @ 8.2
• Rear reinforcements: 3 inches x 5 inches tubular x 3/16 inch with brackets for wall bottom
• Tarp hook: 4 at the front, 5 per side, 3 at the rear
• Floor: 3/16 inch steel with C3 @ 4.1 profiled joists, spaced approximately 16 inches center-to-center
• Longitudinal beams: 6 inches x 2 inches x 1/4 inch
• Offset heavy-duty wheels: 2 wheels, 8 inches in diameter x 10 inches long (4 discs)
• Lifting hook: 1 1/4 inch “J” type
• Ascent rollers: 2 rollers, 4 inches x 6 inches
• Rear door: 3/16 inch steel, side-opening, with 3/16 inch tubular construction
• Rear door hinges: 2 heavy-duty hinges
• Rear door latch and alignment system: 1/2 inch with “V” guides
• Safety chain: 3/8 inch
• Watertightness: Continuous welding and penetrant gas tested for sealing
• Sealant: Duraseal 2 inch fixed with a riveted stainless steel flat bar
• Side door latch: 1 ratchet type
• Bottom door latch: 2 eccentric ratchet types
• “Slide-everything” liner: 1/4 HDPE on the interior walls of the container

Finish:

• Surfaces degreased and thoroughly cleaned with high-pressure steam
• One coat of industrial primer applied to the inside, outside, and underneath the container
• Two coats of industrial enamel paint applied to the exterior sides
• Color: as chosen by the customer