• Walls: 10 GA steel, angled lower front wall
• Vertical Reinforcements: 12 GA steel rounded side posts, 8 1/4″ diameter with 3/4″ drainage holes, spaced ~22″ apart
• Push Guides: C6 @ 8.2
• Rear Reinforcements: 3″ x 5″ x 3/16″ tubular, with lower wall supports
• Top Frame: 3″ x 4″ x 3/16″
• External Ladder: On driver’s side wall, towards the front
• Tarpaulin Fixation Rails: (2) rails, one per side
• Floor: 3/16″ steel with C3 @ 4.1 profiled joists, 16″ on center
• Longitudinal Beams: 6″ x 2″ x 1/4″
• Ground Wheels: (4) 8″ diameter x 10″ length wheels with two discs
• Roller Bearings: (2) 4″ diameter x 6″ length
• Cable Hook: 1 1/4″ ‘J’ type
• Rear Door: Side opening, 3/16″ tubular construction
• Rear Door Hinges: (2) robust
• Rear Door Latching and Alignment System: 1/2″ with ‘V’ guides
• Safety Chain: 3/8″
• Gable Roof: 11 GA steel, 20′ long x 18″ high
• Circular Openings: (4) anti-backflow with split rubber center on each side

Sealing System:

• Seal: DURASEAL ‘P’ seal, stainless steel rivets, (3) stainless steel flat bars
• Door Closure: Ratchet tensioner and (2) hooks
• Lower Door Pressure System: ‘Andy’ type with (2) ratchet tensioners and eccentric tips
• Welding: Continuous waterproof seal

Finish:

• Surfaces: Degreased and high-pressure steam cleaned
• Primer: (1) coat of industrial primer on all sides
• Paint: (2) coats of industrial enamel on exterior sides
• Color: Customer’s choice