Discover America’s Top Choice for outside rails cable hoist roll-off systems. Engineered for superior performance, this roll-off truck efficiently handles and transports all ANSI Z245.60 compliant roll-off containers and platforms, making it a leading choice in the industry.
Here is the lifting system with hydraulic winch and roll-off type cable, the most popular roll-off truck in America.
It has been designed to handle and transport all roll-off containers and platforms conforming to ANSI Z245.60 standards.
A set of greasable side rollers reduce friction and allow easier loading and unloading of containers.
Customize frame based on the chassis, to optimize the space and allow a better load transfer.
Longueur
Série 75/60 000 lb : 22′, 24′ & 26′
Série 35 000 lb : 20′ & 16′
Série 20 000 lb : 16′
| DRC-OR | 16′ | 20′ | 22′ | 24′ | 26′ | |
|---|---|---|---|---|---|---|
| A | Dumping angle | 47° | 47° | 47° | 47° | 47° |
| B | Hoist length – stinger tail closed | 174″ | 222″ | 237″ | 261″ | 285″ |
| Hoist length – stinger tail opened (40″ /60″) | 214″ / 234″ | 262″ / 282″ | 277″ / 297″ | 301″ / 321″ | 325″ / 345″ | |
| Hoist length with fixed tail | 214″ | 262″ | 277″ | 301″ | 325″ | |
| C | Clearance from the rear cabin to the last axle, including space for the tarping system (C.L.A.) |
138″ | 186″ | 210″ | 234″ | 258″ |
| D | Clearance from the rear cabin to the last axle, excluding space for the tarping system (C.L.A.) |
126″ | 174″ | 198″ | 222″ | 246″ |
* The parameters and dimensions given above are for guidance only. Actual dimensions may differ.
The system, designed for a standard roll-off truck, must be compliant with the AINSI Z-245.60 2008 safety standard, and all safety labels must be in the working language. Furthermore, it must be compatible with U-type cable containers. It shall be manufactured with the highest quality standards, and construction plans must be approved by an engineer who is a member of an accredited board.
| Specifications | DRC-20XX-OR | DRC-35XX-OR | DRC-50XX-OR | DRC-60XX-OR | DRC-75XX-OR |
|---|---|---|---|---|---|
| Frame lifting tubes | 3″x 6″ x 1/4″ tubing + 1/4″ x 2 1/2″ x 6′ wear plate |
4″x 10″ x 1/4″ tubing + 1/4″ x 3 1/2″ x 6′ wear plate |
4″x 10″ x 3/8″ tubing + 3/8″ x 3″ x 8′ wear plate |
4″x 12″ x 3/8″ tubing + 3/8″ x 3″ x 8′ wear plate |
|
| Fixed front stopper | 3/4″ thickness | 1-1/2″ thickness | |||
| Winch cable | 5/8″ (6X26 41,000 lb. capacity) + standard 9″ closed “D-ring” hook |
5/8″ turbo (6X26 45,000 lb. capacity) + standard 9″ closed “D-ring” hook |
7/8″ (6X26 95,000 lb. capacity) + standard 9″ closed “D-ring” hook |
1″ (6X26 106,000 lb. capacity) + standard 9″ closed “D-ring” hook |
1″ (6X26 106,000 lb. capacity) + standard 9″ closed “D-ring” hook |
| Wear skids on mobile carrier | Nylatron 1/4″ x 1 3/4″ x 10 1/2″ | Nylatron 1/2″ x 2 1/2″ x 16 3/4″ | |||
| Wear pads | (2) 7″ sheave + 1 1/2″ dia. shaft and (1) 5″ sheave + 1 1/2″ dia. shaft |
(1) 12″ sheave + 2″ dia. shaft and (1) 10″ sheave + 2″ dia. shaft and (1) 8″ sheave + 2″ dia. shaft |
|||
| Side rollers | 3 1/2″ dia. x 4″ long + aluminum bronze bushing (with supports) and 2″ shaft + lubrication point |
4″ dia. x 4″ long + aluminum bronze bushing (with supports) and 2 1/2″ shaft + lubrication point |
|||
| Rear ground roller | 4 1/2″ x 26″ long | 6 5/8″ x 20″ long | |||
| Hinges | 1 1/2″ dia. shaft | 2″ dia. shaft | |||
| Side cylinders – Double Action | 4-1/2″ outer diameter, 4″ bore |
5-3/4″ outer diameter, 5″ bore |
7-1/4″ outer diameter, 6-1/2″ bore |
8-1/4″ outer diameter, 7-1/2″ bore |
|
| Winch cylinders – Double Action | 4-1/2″ outer diameter, 4″ bore |
5-3/4″ outer diameter, 5″ bore |
7-1/4″ outer diameter, 6-1/2″ bore |
8-1/4″ outer diameter, 7-1/2″ bore |
|
| Tank | 30 gallons (110 liters) + 10 micron return filter |
40 gallons (150 liters) + 10 micron return filter |
55 gallons (205 liters) + 10 micron return filter |
||
Lifting system:
Hydraulic System:
Electrical System:
Safety:
Finish:
SUBSCRIBE TO OUR NEWSLETTER!
FOLLOW US!
